Frame
2" x
2" cold drawn electro-welded structural
mechanical steel tubing or specify optional
steel tube frame with 2" exterior radius.
Advantages: Frameless appearance / Easy
replacement pans / Structural integrity.
Roof
Galvanized steel, structurally supported
according to size and load requirements.
Overhangs and/or fascias of all sizes
available.
Advantages: Heat reflective / Designed for
all weather conditions.
Walls
16 Ga.
cold rolled galvanized steel panels MIG
welded between frame and mullions for
self-aligning unitized system, creating a
structural diaphragm. This construction
method (Pan and Post) was introduced into
the market by B.I.G.
Advantages: Sculptured look / Easy
replacement of walls if ever damaged /
Weather tight system / Unitized strength.
Floor
Booths
can be set on a concrete pad or specify
Steel plate, industrial tiles, Aluminum
Diamond plate, Exterior grade plywood, or
vinyl tile. All floors will have weather
resistant B.I.G. Tru Trak threshold and can
be mounted on 1", 2", 3" or 6" Steel Base.
All booths include welded engineered Steel
Drilled Anchor Plates. All steel floors are
covered with our industrial non-skid "Tough
Coat" or industrial tile.
Advantages: Design flexibility to meet
special needs such as handicap. Insulated /
Longevity / Handsome appearance.
Doors
All
steel structural tube frame with galvanized
steel panels with safety glazing. Sliding
doors are top suspended on steel
no-maintenance ball-bearing rollers in steel
track, with high security pocket jamb. Heavy
duty hardware, keyed lock, and
weather-stripping. Swinging, Dutch, or
Bi-fold doors are also available.
Advantages: Steel doors are standard on all
B.I.G. booths. B.I.G. is exclusive provider
of steel rollers and steel tracking systems.
Aesthetically pleasing / Super secure / Less
maintenance / Easy adjusting.
Windows
16 Ga.
galvanized steel window frame system
(painted to match booth) with flush mounted
corners and welded fastening. Tempered clear
safety glass throughout, interior glass
stops with heavy duty fasteners.
Advantages: Aesthetically superior / Super
secure / Less soot or grime buildup / Easy
replacement of glass.
Shelving
Heavy
duty steel shelves with factory finish.
Shelves are rated at 250 lb. plus load.
Standard size is 20" deep.
Electric System
U.L.
approved system, heater, lights wired to
N.E.C. standards. Load Center is 125 Amp
120/240 volt, single phase, 3 wire 8 pole
flush mounted in sheet metal cabinet for
concealing site connections. Duplex outlets
and fluorescent lights with single pole wall
switch.
Advantages: All booths come pre-wired and
with our exclusive undercounter cabinet for
concealing site connections and ease of
installation.
Heater
Fan
forced electric heater 1500 watts 5120 BTU
with thermostat. Mounted next to load center
in sheet metal cabinet. Larger sizes
available.
Advantages: Flush mounted for longer life /
Circulates heat evenly / Manual reset
overload protection.
Finishes
Rust
inhibitive high build epoxy primer and two
part polyurethane finish coat. Superior
impact, fade resistant as well as graffiti
and chemical resistant. Exceeds 1500 hour
salt test and 75 Tabor test.
Advantages: 10 standard colors or optional
computer color matching system / Graphics,
multicolor also available.
Weather Proofing
All
booths are weather-tight for interior or
exterior use. All seams and joints are
pressure bonderized. All openings are fully
weather stripped. Roofs have heat protective
membrane coating. Floor underside is coated.
Advantages: Teflon fabric over urethane foam
for long life. Easy replacement / Excellent
energy and sound efficiency.
Installation
Units
are shipped fully assembled, fully wired,
fully glazed and thoroughly painted.
Position units over electrical stub-up on
level pad. Drill and set 4 Expansion type
Anchor Bolts. Connect power and seal around
edges where the floor base meets the
concrete pad, and that's it. Careful
attention and coordination of electrical
stub-outs will save many man hours.
|
